Dell EMC ME4 Series - AC power cables

Dell EMC compliance
Table 38. Dell EMC compliance specications
Conducted emissions limit levels CFR47 Part 15B Class A
EN55022 Class A
CISPR Class A
Radiated emissions limit levels CFR47 Part 15B Class A
EN55022 Class A
CISPR Class A
Harmonics and icker EN61000-3-2/3
Immunity limit levels EN55024
AC power cables
Table 39. AC power cable specications
1 United States of America–Must be NRTL Listed (National Recognized Test Laboratory – e.g., UL):
Chassis form factor 2U12/2U24 5U84
Cable type SV or SVT, 18 AWG minimum, 3 conductor,
2.0M max length
SJT or SVT, 12 AWG minimum, 3
conductor
Plug (AC source) NEMA 5–15P grounding-type attachment
plug rated 120V 10A
or
IEC 320, C-14, 250V, 10A
IEC 320, C-20, 250V, 20A
or
A suitable plug rated 250V, 20A
Socket IEC 320, C-13, 250V, 10A IEC 320, C-19, 250V, 20A
2 Europe and others–General requirements:
Chassis form factor 2U12/2U24 5U84
Cable type Harmonized, H05-WF-3G1.0 Harmonized, H05-WF-3G2.5
Plug (AC source) IEC 320, C-20, 250V, 16A
or
A suitable plug rated 250V, 16A
Socket IEC 320, C-13, 250V, 10A IEC 320, C-19, 250V, 16A
NOTE: The plug and the complete power cable assembly must meet the standards appropriate to the country, and must have
safety approvals acceptable in that country.
Standards and regulations 151