Dell EMC PowerEdge C6420 - Mezzanine and OCP Cards; Removing a Mezzanine Card

Mezzanine and OCP cards
Removing a mezzanine card
Prerequisites
NOTE: The procedure to remove the mezzanine blank is similar to the removal of a mezzanine card.
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your enclosure.
3 Remove the expansion card riser assembly.
Steps
1 Remove the screws that secure the mezzanine card to the sled.
2 Lift the mezzanine card out of the sled.
NOTE: Install an expansion card ller bracket over an empty expansion slot to maintain Federal Communications
Commission (FCC) certication of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airow inside the system.
Installing and removing enclosure components 115