Dell EMC PowerEdge R540 - Installing PERC Card into the Internal PERC Riser

Figure 41. Removing the PERC card from the internal PERC riser
Next steps
1 Installing the internal PERC riser
2 Installing the air shroud
3 Follow the procedure listed in After working inside your system.
Installing PERC card into the internal PERC riser
Prerequisite
1 Follow the safety guidelines listed in Safety instructions.
Steps
1 Insert the PERC card into the internal PERC riser and push the card in.
2 Using a Phillips #2 screwdriver, replace the screw to secure the PERC card on the internal PERC riser.
88
Installing and removing system components