Figure 91. Removing the top cover of the shroud
10 If applicable, remove the shroud ller from the GPU air shroud slots.
NOTE
: Shroud llers are available in the GPU air shroud for GPUs installed on riser 2 and
3.
Figure 92. Removing the shroud ller from GPU air shroud slots
NOTE
: Shroud llers are available in the GPU air shroud for GPUs installed only on risers 2 and
3.
NOTE: Ensure that the PCIe card holder latches on GPU air shroud and risers are closed before installing the GPU. Full-
length GPU do not require the PCIe card holder latch on the risers to secure the GPU in place.
Installing and removing system components 139
To Next Page
Loading...
