Figure 43. Installing NVDIMM-N battery into mid drive tray
Next step
Follow the procedure listed in After working inside your system.
Removing NVDIMM-N battery from the bracket
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
CAUTION
: NVDIMM-N battery is not hot swappable. To prevent data loss and potential damage to your system, ensure that your
system, LEDs on system, LEDs on NVDIMM-N and LEDs on NVDIMM-N battery are turned o before removing the NVDIMM-N
battery.
CAUTION: To avoid damage to the battery connector, you must rmly support the connector while installing or removing a
battery.
Step
Press the release tab and slide out the NVDIMM-N battery to disengage the tab on the battery from the slot on the bracket.
90
Installing and removing system components
To Next Page
Loading...
