Figure 33. Installing air shroud
Next steps
1 If removed, install the full length PCIe cards.
2 If applicable, install the GPU cards.
3 If applicable, connect the cables to the NVDIMM-N battery.
CAUTION
: NVDIMM-N battery is not hot swappable. To prevent data loss and potential damage to your system, ensure
that your system, LEDs on system, LEDs on NVDIMM-N and LEDs on NVDIMM-N battery are turned o before connecting
the NVDIMM-N battery cables.
4 Follow the procedure listed in After working inside your system.
Cooling fan assembly
Removing the cooling fan assembly
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
Steps
1 Lift the release levers to unlock the cooling fan assembly from the system.
2 Hold the release levers, and lift the cooling fan assembly away from the system.
80
Installing and removing system components
To Next Page
Loading...
