Figure 134. Removing left control panel
Next step
Install the left control panel.
Installing the left control panel
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Route the control panel cable through the side wall of the system.
2 Align the left control panel assembly with the control panel slot on the system and place the assembly in the slot on the system.
3 Connect the control panel cable to the system board connector and secure it using cable latch.
4 Using a Phillips #1 screwdriver, install the screws that secure the control panel and cable tube to the system.
182
Installing and removing system components
To Next Page
Loading...
