iDRAC Quick Sync 2 indicator
code
Condition Corrective action
Sync 2 button to turn on the iDRAC Quick
Sync 2 feature.
Solid white Indicates that iDRAC Quick Sync 2 is ready
to communicate. Press the iDRAC Quick
Sync 2 button to turn o.
If the LED fails to turn o, restart the system. If the
problem persists, see Getting help.
Blinks white rapidly Indicates data transfer activity.
If the indicator continues to blink indenitely, see
Getting help.
Blinks white slowly Indicates that rmware update is in
progress.
If the indicator continues to blink indenitely, see
Getting help.
Blinks white ve times rapidly and
then turns o
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Check if iDRAC Quick Sync 2 feature is congured to
be disabled by iDRAC. If the problem persists, see the
Getting help section. For more information, see
Integrated Dell Remote Access Controller User's
Guide at Dell.com/poweredgemanuals or Dell
OpenManage Server Administrator User’s Guide at
Dell.com/openmanagemanuals > OpenManage Server
Administrator.
Solid amber Indicates that the system is in fail-safe
mode.
Restart the system. If the problem persists, see
Getting help.
Blinking amber Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Restart the system. If the problem persists, see
Getting help.
Right control panel view
Figure 8. Right control panel view
Table 8. Right control panel features
Item Indicator, button, or
connector
Icon Description
1 Power button Indicates if the system is turned on or o. Press the power button to
manually turn on or o the system.
PowerEdge R740 system overview 15
To Next Page
Loading...
Need help?
General
