Figure 118. Cable routing – 8 x 3.5 inch drive backplane with adapter PERC
1
backplane 2 backplane power cable (BP: BP1 to MB: BP1)
3 backplane signal cable (BP: BPSIG1 to MB: BPSIG1) 4 system board
5 adapter PERC 6 SAS A cable (BP: BP SAS A0 to MB: J_BP_PWR_A1)
7 SAS B cable (BP: BP SAS B0 to MB: J_BP_SIG1)
Installing and removing system components 161
To Next Page
Loading...
