Figure 141. Cable routing – 24 x 2.5 inch drive backplane with adapter PERC
1.
backplane 2. backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
3. backplane power cable A (BP: BP1 to MB: BP1) 4. backplane power cable B (BP: BP3 to MB: BP3)
5. SAS cable (BP: PE1_B to adapter PERC) 6. system board
7. adapter PERC 8. backplane expander
Figure 142. Cable routing – 24 x 2.5 inch drive backplane with mini PERC and adapter PERC
1.
backplane 2. backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
3. backplane power cable A (BP: BP1 to MB: BP1) 4. backplane power cable B (BP: BP3 to MB: BP3)
5. SAS cable (BP: PE2_A to adapter PERC) 6. system board
182 Installing and removing system components
To Next Page
Loading...
