7. adapter PERC 8. mini PERC
9. SAS cable (BP: PE1_B to mini PERC) 10. backplane expander
Figure 143. Cable routing – 24 x 2.5 inch drive backplane with 4 x 2.5 inch adapter mid drive tray backplane and 4 x 2.5 inch
rear drive backplane
1.
backplane 2. backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
3. backplane power cable A (BP: BP1 to MB: BP1) 4. backplane power cable B (BP: BP3 to MB: BP3)
5. SAS cable (BP to mid BP) 6. SAS cable (BP to rear BP)
7. system board 8. rear drive backplane
9. mini PERC 10. mid drive backplane
11. 4 x 3.5 (with 4 x 2.5 adapter) inch drives 12. SAS cable (BP: PE1_B to mini PERC)
13. backplane expander
Installing and removing system components 183
To Next Page
Loading...
