Figure 144. Cable routing – 24 x 2.5 inch drive backplane with 4 x 2.5 inch rear drive backplane
1.
backplane 2. backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
3. backplane power cable A (BP: BP1 to MB: BP1) 4. backplane power cable B (BP: BP3 to MB: BP3)
5. SAS cable (BP to rear BP) 6. system board
7. rear drive backplane 8. mini PERC
9. SAS cable (BP: PE1_B to mini PERC) 10. backplane expander
Figure 145. Cable routing – 24 x 2.5 inch drive backplane with 12 SAS plus 12 PCIe and adapter PERC
1.
backplane 2. backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
3. backplane power cable A (BP: BP1 to MB: BP1) 4. backplane power cable B [BP: BP3 to MB (BP3)]
184 Installing and removing system components
To Next Page
Loading...
