5. PCIe cable A of PCIe card 1 (BP: BP PCIE A2 to RAID controller) 6. PCIe cable B of PCIe card 1 (BP: BP PCIE B2 to RAID controller)
7. SAS cable (BP to adapter PERC) 8. system board
9. PCIe card 1 on riser 3A (slot 8) 10. adapter PERC on riser 2A (slot 6)
11. PCIe card 2 on riser 2A (slot 4) 12. PCIe card 3 on riser 1D (slot 1)
13. PCIe cable A of PCIe card 3 (BP: BP PCIE B0 to RAID
controller )
14. PCIe cable B of PCIe card 3 (BP: BP PCIE A0 to RAID
controller )
15. PCIe cable A of PCIe card 2 (BP: BP PCIE B1 to RAID controller) 16. PCIe cable B of PCIe card 2 (BP: BP PCIE A1 to RAID controller)
17. backplane expander
Figure 146. Cable routing – 24 x 2.5 inch NVMe drive backplane
1.
backplane 2. backplane signal cable A (BP: J_BP_SIG to MB)
3. backplane power cable A (BP: J_PWR_A to MB) 4. PCIe cable A (BP: PE2_A to RAID controller)
5. PCIe cable B (BP: PE2_B to RAID controller) 6. backplane signal cable B
7. PCIe card on riser 2 (slot 4) 8. PCIe card on riser 1 (slot 3)
9. PCIe cable A (BP: PE1_A to RAID controller) 10. PCIe cable B ( BP: PE1_B to RAID controller)
11. backplane power cable B (BP: J_PWR_B to MB) 12. backplane expander
Installing and removing system components 185
To Next Page
Loading...
