Figure 147. Cable routing – 24 x 2.5 inch drive backplane with up to 24 NVMe or up to 8 SAS/SATA drives with NVMe
1.
backplane 2. backplane signal cable A (BP: J_BP_SIG to MB)
3. backplane power cable A (BP: J_PWR_A to MB) 4. SAS cable (BP to adapter PERC)
5. PCIe cable A (BP: PE2_A to RAID controller) 6. PCIe cable B (BP: PE2_B to RAID controller)
7. backplane signal cable B 8. adapter PERC on riser 2 (slot 6)
9. PCIe card on riser 2 (slot 4) 10. PCIe card on riser 1 (slot 3)
11. PCIe cable A (BP: PE1_A to RAID controller) 12. PCIe cable B ( BP: PE1_B to RAID controller)
13. backplane power cable B (BP: J_PWR_B to MB) 14. backplane expander
186 Installing and removing system components
To Next Page
Loading...
