Figure 150. Cable routing – 12 x 3.5 inch drive backplane with 4 x 3.5 inch (4 x 2.5 inch adapter) mid drive tray backplane and
2 x 3.5 inch rear drive backplane
1.
backplane 2. backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
3. backplane power cable (BP: BP1 to MB: BP1) 4. SAS cable (BP: A1 BP SAS to mid BP: J_SAS_A1, J_SAS_B1)
5. SAS cable (BP: A2 BP SAS to rear BP: J_SAS_1) 6. mid drive backplane
7. system board 8. rear drive backplane
9. SAS cable (BP: J_SAS_A0_B0 to mini PERC)
Figure 151. Cable routing – 12 x 3.5 inch drive backplane with 4 x 3.5 inch (4 x 2.5 inch adapter) mid drive tray backplane and
4 x 2.5 inch rear drive backplane
1.
backplane 2. backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
188 Installing and removing system components
To Next Page
Loading...
