3. backplane power cable (BP: BP1 to MB: BP1) 4. SAS cable (BP: A1 BP SAS to mid BP: J_SAS_A1, J_SAS_B1)
5. SAS cable (BP: A2 BP SAS to rear BP: J_SAS_1) 6. mid drive tray backplane
7. system board 8. rear drive backplane
9. SAS cable (BP: J_SAS_A0_B0 to mini PERC)
Figure 152. Cable routing – 12 x 3.5 inch drive backplane with 2 x 3.5 inch rear drive backplane
1.
backplane 2. backplane signal cable (Mid BP: J_BP_SIG to MB)
3. backplane power cable (Mid BP: J_BP_PWR to MB) 4. SAS cable (BP: BP: A1 BP SAS to rear BP: J_SAS_A1,
J_SAS_B1)
5. system board 6. rear drive backplane
7. SAS cable (BP: J_SAS_A0_B0 to mini PERC)
Installing and removing system components 189
To Next Page
Loading...
