Figure 153. Cable routing – 12 x 3.5 inch drive backplane with 4 x 2.5 inch rear drive backplane
1.
backplane 2. backplane signal cable (Mid BP: J_BP_SIG to MB)
3. backplane power cable (Mid BP: J_BP_PWR to MB) 4. SAS cable (BP: BP: A1 BP SAS to rear BP: J_SAS_A1,
J_SAS_B1)
5. system board 6. rear drive backplane
7. SAS cable (BP: J_SAS_A0_B0 to mini PERC)
Figure 154. Cable routing - 12x3.5-inch Hybrid backplane with NVMe U.2 SSD
1.
drive backplane 2. backplane signal cable (BP:BP_SIG1 to MB: BP_SIG1)
190 Installing and removing system components
To Next Page
Loading...
