Dell EMC PowerEdge R740xd - Page 46

Serial Communication on page 60
System Profile Settings on page 61
Miscellaneous Settings on page 67
iDRAC Settings utility on page 67
Device Settings on page 68
System Security on page 62
Related tasks
Viewing System BIOS on page 46
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
Steps
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If the operating system begins to load before you press F2, wait for the system to finish booting, and then
restart the system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
System BIOS Settings details
About this task
The System BIOS Settings screen details are explained as follows:
Option
Description
System
Information
Provides information about the system such as the system model name, BIOS version, and Service Tag.
Memory Settings Provides information and options related to the installed memory.
Processor
Settings
Provides information and options related to the processor such as speed and cache size.
SATA Settings Provides options to enable or disable the integrated SATA controller and ports.
NVMe Settings Provides options to change the NVMe settings. If the system contains the NVMe drives that you want to
configure in a RAID array, you must set both this field and the Embedded SATA field on the SATA Settings
menu to RAID mode. You might also need to change the Boot Mode setting to UEFI. Otherwise, you should set
this field to Non-RAID mode.
Boot Settings Provides options to specify the Boot mode (BIOS or UEFI). Enables you to modify UEFI and BIOS boot settings.
Network Settings Provides options to manage the UEFI network settings and boot protocols.
Legacy network settings are managed from the Device Settings menu.
Integrated Devices Provides options to manage integrated device controllers and ports, specifies related features and options.
Serial
Communication
Provides options to manage the serial ports, their related features and options.
System Profile
Settings
Provides options to change the processor power management settings, and memory frequency.
System Security Provides options to configure the system security settings, such as system password, setup password, Trusted
Platform Module (TPM) security, and UEFI secure boot. It also manages the power button on the system.
46 Pre-operating system management applications