Network Settings screen details
The Network Settings screen details are explained as follows:
About this task
Option Description
UEFI PXE Settings
Options Description
PXE Device n (n =
1 to 4)
Enables or disables the device. When enabled, a UEFI PXE boot option is created for the
device.
PXE Device n
Settings(n = 1 to
4)
Enables you to control the configuration of the PXE device.
UEFI HTTP
Settings
Options Description
HTTP Device (n =
1 to 4)
Enables or disables the device. When enabled, a UEFI HTTP boot option is created for the
device.
HTTP Device n
Settings (n = 1 to
4)
Enables you to control the configuration of the HTTP device.
Table 42. HTTP Device n Settings screen details
Option Description
Interface Specifies the NIC interface used for this device.
Protocol Enables you to select protocol IPv4 or IPv6. This is
set to IPv4 by default.
VLAN Enables or Disable VLAN. This is set to Disabled by
default.
VLAN ID This is set to 1.
VLAN Priority This is set to 0.
URI (will obtain from DHCP server if not specified)
UEFI iSCSI
Settings
Enables you to control the configuration of the iSCSI device.
Table 43. UEFI iSCSI Settings screen details
Option Description
iSCSI Initiator Name Specifies the name of the iSCSI initiator in IQN
format.
iSCSI Device1 Enables or disables the iSCSI device. When disabled,
a UEFI boot option is created for the iSCSI device
automatically. This is set to by default.
iSCSI Device1 Settings Enables you to control the configuration of the iSCSI
device.
UEFI iSCSI
Settings
Enables you to control the configuration of the iSCSI device.
Table 44. UEFI iSCSI Settings screen details
Option Description
Connection 1 Specifies the name of the iSCSI initiator in IQN
format.
Pre-operating system management applications 55
To Next Page
Loading...
