Dell EMC PowerEdge T440 - Page 11

Item Components Icon Description
NOTE: Press the power button to gracefully shut down an ACPI-
compliant operating system.
2 System identication
button
The System Identication (ID) button is available on the front and back of the
systems. Press the button to identify a system in a rack by turning on the
system ID button. You can also use the system ID button to reset iDRAC and
to access BIOS using the step through mode.
3 Status LED indicator panel N/A
Indicate the status of the system. For more information, see Status LED
indicators.
4 Information tag N/A
The Information tag is a slide-out label panel that contains system information
such as Service Tag, NIC, MAC address, and so on. If you have opted for the
secure default access to iDRAC, the Information tag also contains the iDRAC
secure default password.
5 USB port 2.0 The USB ports are 4-pin, 2.0-compliant. These ports enable you to connect
USB devices to the system.
6 USB port 3.0 The USB port is USB 3.0 compliant.
7 Optical drive bay N/A Enable you to install drives that are supported on your system. For more
information about drives, see Technical specications.
8 Drive slot N/A Enables you to install TBUs for 8x and 16x backplane congurations, or drive
blank in the empty drive slot to maintain proper system cooling.
Dell EMC PowerEdge T440 system overview 11