Dell EMC PowerEdge T440 - Video Specifications; Environmental Specifications

NOTE: The write-protect switch is on the IDSDM or vFlash module.
Video specications
The Dell EMC PowerEdge T440 system supports Matrox G200eR2 graphics card with 16 MB capacity.
Table 17. Supported video resolution options
Resolution Refresh rate Color depth (bits)
640x480 60, 70 8, 16, 32
800x600 60, 75, 85 8, 16, 32
1024x768 60, 75, 85 8, 16, 32
1152x864 60, 75, 85 8, 16, 32
1280x1024 60, 75 8, 16, 32
1440x900 60 8, 16, 32
Environmental specications
NOTE: For additional information about environmental certications, please refer to the Product Environmental Datasheet
located with the Manuals & Documents on www.dell.com/poweredgemanuals
Table 18. Temperature specications
Temperature Specications
Storage –40°C–65°C (–40°F–149°F)
Continuous operation (for altitude less than 950 m or 3117
ft)
10°C–35°C (50°F–95°F) with no direct sunlight on the equipment.
Maximum temperature gradient (operating and storage) 20°C/h (68°F/h)
Table 19. Relative humidity specications
Relative humidity Specications
Storage 5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere must be
noncondensing always.
Operating 10% to 80% relative humidity with 29°C (84.2°F) maximum dew point.
Table 20. Maximum vibration specications
Maximum vibration Specications
Operating 0.26 G
rms
at 5 Hz to 350 Hz (all 3 axes).
Storage 1.88 G
rms
at 10 Hz to 500 Hz for 15 min (all six sides tested).
Technical specications 33