Dell EMC PowerEdge T440 - Page 15

Figure 5. Front panel view of 16 x 2.5-inch hot swappable drive system
Table 4. Front panel features
Item Components Icon Description
1 Power button
Indicates if the system is turned on or o. Press the power button to manually
turn on or o the system.
NOTE: Press the power button to gracefully shut down an ACPI-
compliant operating system.
2 System identication
button
The System Identication (ID) button is available on the front and back of the
systems. Press the button to identify a system in a rack by turning on the
system ID button. You can also use the system ID button to reset iDRAC and
to access BIOS using the step through mode.
Dell EMC PowerEdge T440 system overview 15