Dell 1815dn - All-in-one Laser Printer - Windows 2000; Windows 98

Understanding the Printer Software 33
Windows 2000:
1 Make sure that the printer is connected to your computer and powered on.
2 When the hardware wizard screen appears, insert the drivers and utilities CD and click Next .
NOTE: For each wizard that appears, select Search for a suitable driver for my device (Recommended), click
Next, select CD-ROM Drives, and then click Next through the wizard screens.
3 The scanner driver is automatically loaded first from D:\1815\Scan\WINXP2K\p3scan.inf , where “D”
is your CD drive.
4 Click Next .
5 Click Finish , and a second hardware wizard appears. The printer driver is automatically loaded from
D:\ delr1.inf , where “D” is your CD drive.
6 Click Next , and then click Finish .
Windows 98:
1 Make sure that the printer is connected to your computer and powered on.
2 When the hardware wizard screen appears, insert the drivers and utilities CD and click Next .
3 Select Search for the best driver for your device (Recommended) , and click Next .
4 Select Specify a Location , and then click Browse .
5 Select D:\USB , where “D” is your CD drive.
6 Click OK , and then click Next three times. The driver installs.
7 Click Finish , and a second wizard appears.
8 If the CD menu screen appears above the wizard, click Add New Hardware Wizard from the Windows
taskbar.
9 Click Next . Search for the best driver for your device (Recommended) is selected.
10 Click Next . D:\USB is selected.
11 Click Next two times. The driver installs.
12 Click Finish , and a third hardware wizard appears.
13 Click Next . Search for the best driver for your device (Recommended) is selected.
14 Click Next , click Browse , select the location D:\1815\Scan\WIN98ME , and click OK .
15 Click Next two times. The driver installs.
16 Click Finish .