Dell 1815dn - All-in-one Laser Printer User Manual

Installing Options 97
7 Close the control board cover.
8 Reconnect the power cord and printer cable, and turn the printer on.
Activating the Added Memory in the PS Printer Properties
After installing the memory DIMM, you need to select it in the printer properties of the PostScript
printer driver so that you can use it:
1 Make sure that the PostScript printer driver is installed on your computer. For details about installing
the PS printer driver, see "Installing Dell Software For Local Printing" on page 32.
2 Click the Windows Start menu.
3 For Windows 98/Me/NT 4.0/2000, select Settings and then Printers .
For Windows XP, select
Printers and Faxes .
4 Select the Dell Laser MFP 1815 PS printer.
5 Right-click the printer icon and:
In Windows 98/Me, click
Properties .
In Windows 2000/XP, click
Print Setup or click Properties and then point to Printing Preferences .
In Windows NT 4.0, click
Document Default .
6 For Windows 98/Me, select Device Options .
For Windows NT 4.0/2000/XP, select
Device Settings .
7 Select the memory DIMM you installed from Printer Memory in the Installable Option section.
For Windows 98, select
Installable Option VMOption change setting for:VMOption
change memory .
8 Click OK .
→
→
→

Dell 1815dn - All-in-one Laser Printer Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax Transmission Speed	33.6 Kbps
Monthly Duty Cycle	Up to 15, 000 pages
Connectivity	USB 2.0, Ethernet
Duplex Printing	Automatic
Functions	Print, Copy, Scan, Fax
First Page Out Time	Less than 8.5 seconds
Memory	32 MB
Paper Handling	250-sheet input tray, 50-sheet multi-purpose tray
Media Size	A4, A5, B5
Maximum Paper Size	Legal
Operating System Compatibility	Windows, Linux, Mac OS