Dell 1815dn - All-in-one Laser Printer User Manual

Maintenance 75
5
Maintenance
Replacement Parts
From time to time, you need to replace the rollers and fuser unit to maintain top performance and to
avoid print quality problems and paper feed problems resulting from worn parts.
The following items should be replaced after you have printed the specified number of pages.
To purchase replacement parts, contact your Dell dealer or the retailer where you bought your
printer. We strongly recommend that these items be installed by a trained service professional.
Replacing the ADF Rubber Pad
You can purchase an ADF rubber pad from your Dell dealer or the retailer where you bought your
printer.
1 Open the ADF cover.
2 Rotate the bushing on the right end of the ADF roller toward the ADF and remove the roller from
the slot.
Item Yield (Average)
ADF rubber pad Approx. 20,000 pages
Transfer roller Approx. 70,000 pages
Fuser unit Approx. 80,000 pages
Tray rubber pad Approx. 250,000 pages
Pickup roller Approx. 150,000 pages

Dell 1815dn - All-in-one Laser Printer Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax Transmission Speed	33.6 Kbps
Monthly Duty Cycle	Up to 15, 000 pages
Connectivity	USB 2.0, Ethernet
Duplex Printing	Automatic
Functions	Print, Copy, Scan, Fax
First Page Out Time	Less than 8.5 seconds
Memory	32 MB
Paper Handling	250-sheet input tray, 50-sheet multi-purpose tray
Media Size	A4, A5, B5
Maximum Paper Size	Legal
Operating System Compatibility	Windows, Linux, Mac OS