Dell Alienware m15 R6 - Page 14

Steps
1. Remove the two screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.
2. Loosen the two captive screws (M2.5x8.5+3.5) that secure the base cover to the palm-rest and keyboard assembly.
3. Loosen the four captive screws (M2.5x1.7+3.3) that secure the base cover to the palm-rest and keyboard assembly.
NOTE: Loosening the four screws creates a gap, which can be used to pry and lift the base cover off the palm-rest and
keyboard assembly.
14