Name: Dell Alienware m15 R6
Brand: Dell
Rating: 4 (1 reviews)

To Next Page

To Previous Page

About this task

The following image indicates the location of the battery cable and provides a visual representation of the installation procedure.

Steps

1. Align and place the battery cable on the battery.

2. Route the battery cable through the routing guides on the battery.

3. Connect the battery cable to the connector on the battery.

Next steps

1. Install the

battery.

2. Install the

base cover.

3. Follow the procedure in After working on your computer.

Solid-state drive

Removing the 2230 solid-state drive in SSD slot one

Prerequisites

1. Follow the procedure in Before working inside your computer.

CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.

CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.

2. Remove the base cover.

About this task

NOTE: This procedure applies only to computers shipped with a 2230 solid-state drive installed in SSD slot one.

Other manuals for Dell Alienware m15 R6

Questions and Answers:

Need help?

Do you have a question about the Dell Alienware m15 R6 and is the answer not in the manual?

General