Table 32. System setup options—Integrated Devices menu(continued)
Integrated Devices
Enable Thunderbolt Boot Support Enables or disables Thunderbolt™ adapter peripheral devices and USB devices
that are connected to the Thunderbolt™ adapter to be used during BIOS pre-
boot.
By default, the Enable Thunderbolt Boot Support option is disabled.
Enable Thunderbolt (and PCIe behind
TBT) pre-boot modules
Enables or disables PCIe devices that are connected through a Thunderbolt™
adapter to run the PCIe device's UEFI Option ROM (if present) during pre-boot.
By default, the Enable Thunderbolt (and PCIe behind TBT) pre-boot modules
option is disabled.
Disable USB4 PCIE Tunneling Enables or disables the USB4 PCIE tunneling.
By default, the Disable USB4 PCIE Tunneling option is disabled.
Video/Power only on Type-C Ports Enables of disables the Type-C port functionality to Video or Power only.
By default, the Video/Power only on Type-C Ports option is disabled.
Type-C Dock Override Enables or disables to use connected Type-C Dell Dock to provide data stream
with external USB ports disabled. When Type-C Dock override is enabled, the
Video/Audio/LAN submenu is activated.
By default, the Type-C Dock Override option is enabled.
Type-C Dock Video Enables or disables the usage of video inputs and outputs from the connected
Type-C Dell docking station.
By default, the Type-C Dock Video option is enabled.
Type-C Dock Audio Enables or disables the usage of audio inputs and outputs from the connected
Type-C Dell docking station.
By default, the Type-C Dock Audio option is enabled.
Type-C Dock Lan Enables or disables the usage of LAN on the external ports of the connected
Type-C Dell docking station.
By default, the Type-C Dock Lan option is enabled.
Table 33. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation Sets the operating mode of the integrated storage device controller.
By default, RAID On option ins selected.
Storage Interface Displays the information of various onboard drives.
Port Enablement Enables or disables the onboard drives.
M.2 PCIe SSD-0 Enables or disables the M.2 PCIe SSD-0.
By default, the M.2 PCIe SSD-0 option is enabled.
M.2 PCIe SSD-1 Enables or disables the M.2 PCIe SSD-1.
By default, the M.2 PCIe SSD-1 option is enabled.
SMART Reporting
Enable SMART Reporting Enables or disables Self-Monitoring, Analysis, and Reporting Technology
(SMART).
By default, the Enable SMART Reporting option is disabled.
Drive Information Displays the information of various onboard drives.
104
To Next Page
Loading...
