Table 39. System setup options—Update,Recovery menu(continued)
Update,Recovery
the event of EC corruption, ME corruption, or a hardware issue. The recovery
image must exist on an unencrypted partition on the drive.
BIOS Downgrade
Allow BIOS Downgrade Controls flashing of the computer firmware to previous revisions.
By default, the Allow BIOS Downgrade option is enabled.
SupportAssist OS Recovery Enables or disables the boot flow for SupportAssist OS Recovery tool, in the event
of certain system error.
By default, the SupportAssist OS Recovery option is enabled.
BIOSConnect
BIOSConnect Enables or disables cloud Service OS recovery if the main OS fails to boot within
the number of failures equal or greater than the value specified by Dell Auto OS
Recovery Threshold, and local Service does not boot, or is not installed.
By default, the BIOSConnect option is enabled.
Dell Auto OS Recovery Threshold
Dell Auto OS Recovery Threshold Allows you to controls the automatic boot flow for SupportAssist System
Resolution Console and for Dell operating system Recovery tool.
By default, Dell Auto OS Recovery Threshold option is set to 2.
Table 40. System setup options—System Management menu
System Management
Service Tag Displays the Service Tag of the computer.
Asset Tag Creates a system Asset Tag that can be used by an IT administrator to uniquely
identify a particular system.
NOTE: Once set in the BIOS, the Asset Tag cannot be changed.
AC Behavior
Wake on AC Enables or disables the computer to turn on and go to boot when AC power is
supplied to the computer.
By default, the Wake on AC option is disabled.
Wake on LAN
Wake on LAN Enables of disables the computer to turn on by a special LAN signal.
By default, Disabled option is selected.
Auto On Time
Auto On Time Enable to set the computer to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, Disabled option is selected.
DIagnostics
OS Agent Requests Enables the user to configure the Ownership date.
By default, the OS Agent Requests option is disabled.
Power-on Self-Test Attomatic Recovery
Power-on Self-Test Automatic Recovery Enables or disables the computer to respond before completing the BIOS Power-
on Self-Test (POST).
111
To Next Page
Loading...
