Copying 239
Lighter/Darker
To adjust the contrast to make the copy lighter or darker than the original:
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 235 or "Making Copies From
the Document Glass" on page 233.
2
Press the (
Copy
) button.
3
Press the button until
Preferences
is highlighted, and then press the (
Set
) button.
4
Press the button until
Lighter/Darker
is highlighted, and then press the (
Set
) button.
5
Press the or
button to select the desired settings, and then press the (
Set
) button.
NOTE: Values marked by an asterisk (
*
) are the factory default menu settings.
Sharpness
To adjust the sharpness to make the copy sharper or softer than the original:
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 235 or "Making Copies From
the Document Glass" on page 233.
2
Press the (
Copy
) button.
3
Press the button until
Preferences
is highlighted, and then press the (
Set
) button.
4
Press the button until
Sharpness
is highlighted, and then press the (
Set
) button.
5
Press the button to select the desired settings, and then press the (
Set
) button.
NOTE: Values marked by an asterisk (
*
) are the factory default menu settings.
Text Suitable for documents with text.
Text & Photo* Used for documents with both text and photos.
Photo Suitable for documents with photos.
Lighter2 Makes the copy lighter than the original. Works well with dark print.
Lighter1
Normal* Works well with standard typed or printed documents.
Darker1 Makes the copy darker than the original. Works well with light print or faint pencil markings.
Darker2
To Next Page
Loading...
