Copying 241
Multiple-Up
To print two original images to fit onto one sheet of paper:
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 235 or "Making Copies From
the Document Glass" on page 233.
2
Press the (
Copy
) button.
3
Press the button until
Preferences
is highlighted, and then press the (
Set
) button.
4
Press the button until
Multiple-Up
is highlighted, and then press the (
Set
) button.
5
Press the button to select the desired setting, and then press the (
Set
) button.
NOTE: Values marked by an asterisk (
*
) are the factory default menu settings.
Off* Does not perform multiple-up printing.
Auto Automatically reduces the original images to fit onto one sheet of paper.
Manual Prints the original images onto the one sheet of paper in the size specified in
Reduce/Enlarge.
Auto:
Automatically
reduces the images
to fit in one page.
Manual:
Reduces the images in the
custom size depending on
the setting of the
Reduce/Enlarge
menu.
To Next Page
Loading...
