Table 7. System setup options—Advanced menu(continued)
Advanced
Default: Disabled
BIOS Recovery from Hard Drive Enables the computer to recover from certain corrupted BIOS
conditions from a recovery file on the user primary hard drive
or an external USB key.
NOTE: BIOS Recovery from Hard Drive is not available for
Self-encrypting drives (SED).
Default: Enabled
BIOS Auto-Recovery When enabled, the autorecovery will be performed if BIOS
image integrity check fails and there is a a recovery image on
the hard drive.
NOTE: BIOS Auto-Recovery is not possible from other
media.
Default: Disabled
SupportAssist System Resolution Controls the automatic boot flow for SupportAssist System
Resolution Console and for Dell operating system Recovery
tool.
Default: 2
Auto OS Recovery Threshold Allows you to configure the Auto OS Recovery Threshold.
Default: 2
SupportAssist OS Recovery Allows you to enable or disable the SupportAssist OS
Recovery.
Default: Enabled
Table 8. System setup options—Security menu
Security
Unlock Setup Status Displays the unlock setup status.
Admin Password Status Displays whether the admin password is set.
Default: Not Set
System Password Status Displays whether the system password is set.
Default: Not Set
HDD Password Status Displays if the hard drive password is set.
Default: Not Set
Asset Tag Creates a system Asset Tag that can be used by an IT
administrator to uniquely identify a particular system. Once
set in BIOS, the Asset Tag cannot be changed.
Admin Password Enables the user to set, change, or delete the admin
password.
System Password Enables the user to set, change, or delete the system
password.
HDD Password Enables the user to set, change, or delete the hard drive
password.
SED Block SID Authentication Allows you to enable or disable SED Block SID
Authentication.
Default: Disabled
102 System setup
To Next Page
Loading...
