Dell E525w - Page 150

150 Understanding the Printer Menus
Auto Reset
Purpose:
To automatically reset the settings on the operator panel to the defaults and return to the standby mode after you do
not specify any settings for the specified time.
Va lu e s:
Fault Time-Out
Purpose:
To specify the time taken by the printer before it cancels jobs that stop abnormally. The print job is canceled if it
times out.
Va lu e s:
Job Time-Out
Purpose:
To specify the amount of time that the printer waits for data to arrive from the computer. The print job is canceled if
it times out.
Va lu e s:
45sec*
1min
2min
3min
4min
Off Disables the fault time-out.
On* 60sec* Specifies the time taken by the printer before it cancels for jobs that stop abnormally.
Available Range:
3–300sec
Off Disables the job time-out.
On* 60sec* Specifies the amount of time that the printer waits for data to arrive from the computer.
Available Range:
5–300sec