Dell E525w - Page 151

Understanding the Printer Menus 151
Date & Time
Purpose:
To set the date and time, and regional time zone of the printer.
Va lu e s:
Alert Tone
Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message appears.
Va lu e s:
Set Date Specifies the current date.
Set Time Specifies the current time.
Date Format
*1
yy/mm/dd Specifies the date format.
mm/dd/yy
dd/mm/yy
Time Format 12H Specifies the time format.
24H*
Time Zone Specifies the time zone.
*1
The default varies depending on country-specific factory default.
Panel Select Tone Off* Does not emit a tone when the operator panel input is correct.
Low Emits a tone at the specified volume when the operator panel input is correct.
Medium
High
Panel Alert Tone Off* Does not emit a tone when the operator panel input is incorrect.
Low Emits a tone at the specified volume when the operator panel input is incorrect.
Medium
High
Auto Clear Alert Off* Does not emit a tone before the printer performs auto clear.
Low Emits a tone at the specified volume 5 seconds before the printer performs auto clear.
Medium
High
Job Tone Off Does not emit a tone when a job is complete.
Low Emits a tone at the specified volume when a job is complete.
Medium*
High
Alert Tone Off Does not emit a tone when a problem occurs.
Low Emits a tone at the specified volume when a problem occurs.
Medium*
High