Install a 2.5" drive........................................................................................................................................................39
Verify the operation of a replacement drive.........................................................................................................40
Return a faulted part.................................................................................................................................................. 40
Add a new drive to the base enclosure........................................................................................................................40
Removing the front bezel..........................................................................................................................................40
Remove a drive filler module.................................................................................................................................... 40
Install a 2.5" drive.........................................................................................................................................................41
Verify the operation of an added drive.................................................................................................................. 42
Replace an AC power supply.......................................................................................................................................... 42
Identify a faulted power supply from PowerStore Manager.............................................................................42
Base enclosure AC power supply.............................................................................................................................43
Remove a power supply.............................................................................................................................................43
Install a power supply................................................................................................................................................. 44
Verify the operation of a replacement power supply......................................................................................... 45
Return a faulted part.................................................................................................................................................. 45
Replace a DC power supply............................................................................................................................................ 45
Identify a faulted power supply from PowerStore Manager.............................................................................46
Base enclosure DC power supply............................................................................................................................ 46
Remove a DC power supply......................................................................................................................................46
Install a DC power supply.......................................................................................................................................... 47
Verify the operation of a replacement power supply......................................................................................... 48
Return a faulted part.................................................................................................................................................. 48
Replace a 4-port card...................................................................................................................................................... 49
Before you begin..........................................................................................................................................................49
Identify a faulted 4-port card from PowerStore Manager................................................................................ 49
Embedded module LEDs............................................................................................................................................ 49
Power down the node................................................................................................................................................ 50
Remove the node........................................................................................................................................................ 50
Remove the embedded module cover from the node........................................................................................ 52
Remove a 4-port card................................................................................................................................................ 53
Install a 4-port card.....................................................................................................................................................54
Install the embedded module cover........................................................................................................................ 55
Install the node.............................................................................................................................................................56
Power up the node......................................................................................................................................................56
Verify the operation of a new 4-port card............................................................................................................ 57
Return a faulted part.................................................................................................................................................. 57
Replace an SFP..................................................................................................................................................................57
Identify a faulted SFP module from PowerStore Manager............................................................................... 57
Remove an SFP module.............................................................................................................................................58
Install an SFP module................................................................................................................................................. 58
Verify the operation of a replacement SFP module............................................................................................58
Return a faulted part..................................................................................................................................................59
Replace an I/O module.................................................................................................................................................... 59
Before you begin......................................................................................................................................................... 59
Identify a faulted I/O module from PowerStore Manager................................................................................ 59
Base enclosure I/O module LEDs............................................................................................................................ 60
Power down the node................................................................................................................................................ 60
Remove an I/O module.............................................................................................................................................. 60
Install an I/O module................................................................................................................................................... 61
Power up the node...................................................................................................................................................... 61
4
Contents
To Next Page
Loading...
Need help?
General