Remove the dual inline memory module
Steps
1. Locate the faulted DIMM in the node.
The DIMMs are identified by white or black retaining tabs.
Figure 81. Top view of the node
NOTE: The leftmost DIMM slot is 11, and the slots decrease sequentially to slot 0 on the far right.
2. Depress the white or black retaining tabs downward to free the DIMM from its slot.
3. Remove the faulted DIMM.
Figure 82. Removing the DIMM
Install the dual inline memory module
Steps
1. Touching only the outside edges of the DIMM, align the DIMM with the connector.
72
Base enclosure service procedures
To Next Page
Loading...
