Installing Ports | 45
CAUTION: The CX4 module does not use transceivers. However, you can use a CX4 cable with an XFP port
by inserting a CX4 XFP converter (catalog name GP- XFP-1CX4) into the slot. An XFP port does not support
the use of the cx4-cable-length command. For details, see
Inserting Optional Modules (10-Gigabit or Stacking)
on page 17
.
For enabling ports with FTOS, see the FTOS Configuration Guide.
With SFTOS, see the SFTOS Configuration Guide or the S50V and S50N Quick Reference.
To Next Page
Loading...
