Identifier GUID-2850CA15-9CEF-415A-ADAA-1614E65C491B
Status Released
Removing the display back-cover and antenna
assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Identifier GUID-AE6E3E68-9BF6-4AE0-8DA8-CE81BA83EF95
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the wireless card.
4 Remove the rear cover.
5 Follow the procedure from step 1 to step 17 in Removing the computer base.
6 Remove the display assembly.
7 Remove the display bezel.
8 Remove the display hinges.
9 Remove the display panel.
10 Remove the display cable.
11 Remove the camera.
Identifier GUID-6A61E4F9-2F98-49D1-A863-0A47A0F5791B
Status Released
Procedure
1 Peel the tape that secures the camera cable to the display back-cover and antenna assembly.
2 Note the camera cable routing and remove the camera cable from the routing guides on the display back-cover and antenna assembly.
53
122 Removing the display back-cover and antenna assembly
To Next Page
Loading...
