Table 4. System setup options—Boot Configuration menu(continued)
Boot Configuration
Custom Mode Key Management Selects the security key database.
By default, PK is selected.
Table 5. System setup options—Integrated Devices menu
Integrated Devices
Date/Time
Date Sets the computer date in MM/DD/YYYY format. Changes to the date take effect
immediately.
Time Sets the computer time in HH/MM/SS 24-hour format. You can switch between 12-
hour and 24-hour clock. Changes to the time take effect immediately.
Thunderbolt Adapter Configuration
Enable Thunderbolt Technology Support Enables or disables Thunderbolt Technology Support.
Default: ON
Enable Thunderbolt Boot Support Enables or disables Thunderbolt Boot Support.
Default: OFF
EnableThunderbolt (and PCIe behind TBT)
pre-boot modules
Enables or disables to allow or disallow PCIe devices to be connected through a
Thunderbolt adapter during pre-boot.
Default: OFF
Camera Enables or disables the camera.
By default, Enable Camera is selected.
Audio Enables or disables all integrated audio controller.
Default: ON
Table 6. System setup options—Storage menu
Storage
SATA Operation Configures operating mode of the integrated SATA hard drive controller.
Default: RAID On. SATA is configured to support RAID (Intel Rapid Restore
Technology).
Enable SMART Reporting Enables or disables Self-Monitoring, Analysis, and Reporting Technology (SMART).
Default: OFF
Drive Information Displays the information of various onboard drives.
Enable MediaCard Enables to switch all media cards On/Off or set the media card to read-only state.
By default, Enable Secure Digital (SD) Card is selected.
Table 7. System setup options—Display menu
Display
Display Brightness
Brightness on battery power Sets the screen brightness when the computer is running on battery power.
Default: 50
Brightness on AC power Sets the screen brightness when the computer is running on AC power.
Default: 0
80 System setup
To Next Page
Loading...
