Dell Latitude 14 Rugged - 5414 - Removing the Press Latch Doors; Installing the Press Latch Doors; Stylus and Tether; Removing the Stylus and Tether

Removing the press latch doors
Remove the screws that secure the press-latch door and lift it from the computer [1,2].
Installing the press latch doors
1. Align the press latch door with the screw holes on the computer.
2. Tighten the screws to secure the press latch door.
Stylus and tether
Removing the stylus and tether
1. Pull the stylus out from the slot on the computer [1].
2. Release and remove the tether from the computer [2].
16