Dell Latitude 14 Rugged - 5414 - Power Connector; Removing the Power Connector; Installing the Power Connector

h. base cover
i. battery
11. Follow the procedure in After working inside your computer.
Power connector
Removing the power connector
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. battery
b. hard drive
c. optical drive
d. base cover
e. I/O board
f. GPS board
g. WLAN card
h. WWAN card
i. hard drive tray
j. system board
3. To remove the power connector:
a. Peel the adhesive tape to access the power connector [1].
b. Pull and lift the power connector away from the computer [2].
Installing the power connector
1. Place the power connector onto the slot in the computer.
2. Affix the adhesive tape to secure the power connector.
3. Install the:
48