5. Peel the adhesive tapes [1] [2] [4] [5] and disconnect the display cables from the connectors [3] [6].
Installing the display
1. Connect the display cables to the connectors and fix the adhesive tapes.
2. Replace the display until it clicks in the display assembly.
3. Tighten the screws to secure the display to the display assembly.
4. Place the plastic tab to secure it in the display assembly.
5. Flip the display assembly.
6. Tighten the screws to secure the display to the display assembly.
7. Install the:
39
To Next Page
Loading...
