Smart card module
Removing the Smart card board
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. battery
b. hard drive
c. optical drive
d. base cover
e. hard drive tray
3. To remove the Smart card board:
a. Lift the latch [2] and disconnect the cable from the connector [3].
b. Remove the screws that secure the Smart card board [6].
c. Lift the Smart card board away from the assembly [7].
Installing the Smart card board
1. Place the Smart card board on the assembly.
2. Tighten the screws to secure the Smart card board to the assembly.
3. Connect the cable to the connector.
4. Install the:
a. hard drive tray
b. base cover
c. optical drive
d. hard drive
e. battery
5. Follow the procedure in After working inside your computer.
Keyboard
Removing the keyboard
1. Follow the procedure in Before working inside your computer.
2. Remove the battery.
3. To release the keyboard:
a. Remove the screws that secure the keyboard to the computer chassis [1].
24
To Next Page
Loading...
