b. Pry along the edges and flip the keyboard over the display [2].
4. To remove the keyboard:
a. Remove the screws that secure the keyboard door [1].
b. Lift the keyboard door away from the computer [2].
c. Release the latches [3, 5] and disconnect the keyboard cables from the connectors on the system
board [4, 6].
d. Lift the keyboard away from the computer [7].
Installing the keyboard
1. Connect the keyboard cables to the connectors on the system board.
2. Place the keyboard door over its slot on the computer.
3. Tighten the screws that secure the keyboard door to the computer.
25
To Next Page
Loading...
