d. base cover
e. I/O board
f. GPS board
g. WLAN card
h. WWAN card
i. hard drive tray
3. Lift the latch [1] and disconnect the system board cables [2].
4. Close the display and flip the computer.
5. To release the system board:
a. Lift the latch [1] and disconnect the I/O cable from the system board [2].
b. Remove the screws that secure the metal tab [3].
c. Lift the metal tab to access the eDP cable [4].
d. Disconnect the eDP cable from the system board [5].
45
To Next Page
Loading...
