Dell Latitude E6430 - Removing the LVDS and Camera Cable

3. Connect the LVDS and the camera cable to the camera.
4. Install:
a) display panel
b) display bezel
c) display assembly
d) battery
5. Follow the procedures in After Working Inside Your Computer .
Removing the LVDS and Camera Cable
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a) battery
b) base cover
c) hard drive
d) bluetooth card
e) keyboard trim
f) keyboard
g) display assembly
h) display bezel
i) display panel
j) display hinges
3. Disconnect the LVDS and camera cable from the camera.
4. Peel back the adhesives securing the LVDS and camera cable to the display assembly.
57