Dell PowerEdge R7615 - Page 116

Figure 78. 8 x 2.5 inch x4 PCIe U.2 NVMe SSD with FPERC11
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 73. 8 x 2.5 inch x4 PCIe U.2 NVMe SSD with FPERC11
Order From To
1 SIG_PWR_1 (system board power
connector)
BP_PWR_1 (backplane power
connector)
2 SL1_CPU1_PB2 (signal connector on
system board)
CTRL_DST_PA1 (fPERC input
connector)
3 CTRL_SRC_PB1 (fPERC controller
connector)
DST_PA2 and DST_PB2 (backplane
signal connector)
4 CTRL_SRC_PA1 (fPERC controller
connector)
DST_PA1 and DST_PB1 (backplane
signal connector)
116 Installing and removing system components