Figure 12. Inside the system with processor liquid cooling module
1. Drive backplane
2. Expansion card board
3. Cooling fan cage assembly
4. Liquid cooling module
5. Riser 4
6. Riser 3
7. Intrusion switch
8. Power Supply Unit (PSU 1)
9. Power Supply Unit (PSU 2)
10. Handle
11. Riser 1
12. Riser 3
13. System board
14. Information tag
NOTE: To show the liquid cooling configuration system, air shroud is not shown in the image.
Locating the Express Service Code and Service Tag
The unique Express Service Code and Service Tag is used to identify the system. The information tag is located on the front of
the system that includes system information such as Service Tag, Express Service Code, Manufacture date, NIC, MAC address,
System overview
19
To Next Page
Loading...
