Table 20. PowerEdge R7615 USB specifications (continued)
Front Rear Internal (optional)
USB port type No. of ports USB port type No. of ports USB port type No. of ports
iDRAC Direct
port (Micro-AB
USB 2.0-
compliant port)
One USB 3.0-
compliant port
One
NOTE: The micro USB 2.0 compliant port can only be used as an iDRAC Direct or a management port.
NIC port specifications
The PowerEdge R7615 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports embedded on
the LAN on Motherboard (LOM) and integrated on the Open Compute Project (OCP) cards.
Table 21. NIC port specification for the system
Feature Specifications
(Optional) LOM card 1 Gb x 2
(Optional) OCP card (OCP 3.0) 1GbE x 4, 10 GbE x 2, 10 GbE x 4, 25 GbE x 2, 25 GbE x 4
NOTE: The system allows either LOM card or an OCP card or both to be installed in the system.
NOTE: On the system board, the supported OCP PCIe width is x8; when x16 PCIe width is installed, it is downgraded to x8.
Serial connector specifications
The PowerEdge R7615 system supports one optional card type serial connector, which is a 9-pin connector, Data Terminal
Equipment (DTE), 16550-compliant .
The optional serial connector card is installed similar to an expansion card filler bracket.
VGA ports specifications
The PowerEdge R7615 system supports One DB-15 VGA port on the front panel and one on the rear panel (optional for
processor liquid cooling).
Video specifications
The PowerEdge R7615 system supports integrated Matrox G200 graphics controller with 16 MB of video frame buffer.
Table 22. Supported video resolution options
Resolution Refresh rate (Hz) Color depth (bits)
1024 x 768 60 8, 16, 32
1280 x 800 60 8, 16, 32
1280 x 1024 60 8, 16, 32
1360 x 768 60 8, 16, 32
1440 x 900 60 8, 16, 32
1600 x 900 60 8, 16, 32
32 Technical specifications
To Next Page
Loading...
