Dell PowerEdge R7615 - Cable Routing

Cable routing
Figure 71. 8 x 3.5 inch SAS/SATA fPERC10.15
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 66. 8 x 3.5 inch SAS/SATA fPERC
Order From To
1 SL1_CPU1_PA1 (signal connector on
system board)
CTRL_DST_PA1 (fPERC input
connector)
2 SIG_PWR_1 (system board power
connector)
BP_PWR_1 (backplane power
connector)
Installing and removing system components 109